Cisco Cisco ASR 5000
FA Service Configuration Mode Commands
▀ revocation
▄ Command Line Interface Reference, StarOS Release 18
5090
Specifies the number of seconds to wait for a Revocation Acknowledgement from the HA before
retransmitting the Revocation message.
retransmitting the Revocation message.
secs
must be an integer from 1 through 10.
trigger internal-failure
Default: disabled
Enable sending a revocation message to the HA for all sessions that are affected by an internal task failure.
Enable sending a revocation message to the HA for all sessions that are affected by an internal task failure.
Usage
Use this command to enable or disable the MIP revocation feature on the FA or to change settings for this
feature. Both the HA and the FA must have Registration Revocation enabled and FA/HA authorization must
be in use for Registration Revocation to be negotiated successfully.
feature. Both the HA and the FA must have Registration Revocation enabled and FA/HA authorization must
be in use for Registration Revocation to be negotiated successfully.
Example
The following command enables Registration Revocation on the FA:
revocation enable
The following command sets the maximum number of retries for a Revocation message to 6:
revocation max-retransmission 6
The following command sets the timeout between retransmissions to 10:
revocation retransmission-timeout 10