Cisco Cisco ASR 5000
Global Configuration Mode Commands (A-K)
card-standby-priority ▀
Command Line Interface Reference, StarOS Release 18 ▄
5319
card-standby-priority
Configures the redundancy priorities for packet processing cards by specifying the slot number search order for a
standby card when needed.
standby card when needed.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
card-standby-priority slot_num+
slot_num
Specifies the slot of the card for the order of the standby cards.
slot_num
must be in the range from 1
through 16 excluding slots 8 and 9 (on the ASR 5000) or 1 through 10 excluding slots 5 and 6 (on the ASR
5500).
5500).
+
indicates that you may enter as many slot numbers (separated by a space) as necessary to indicate
the complete search order.
Usage
Set the standby order of the redundant cards when multiple standby cards are available.
Questionable hardware should be placed lower in the priority list.
Questionable hardware should be placed lower in the priority list.
Important:
This command replaces the
pac-standby-priority
command.
Important:
This command is not supported on all platforms.
Example
The following command configures the redundancy priority to use the standby cards in slots 16, 14, and 12 in
that order:
that order:
card-standby-priority 16 14 12