Cisco Cisco ASR 5000
LAC Service Configuration Mode Commands
▀ allow
▄ Command Line Interface Reference, StarOS Release 18
6886
allow
This command configure the system to allow different attributes in the LAC Hostname Attribute Value Pair (AVP) and
Called-Number AVP for L2TP messages exchanged between LAC and LNS.
Called-Number AVP for L2TP messages exchanged between LAC and LNS.
Product
GGSN
PDSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LAC Service Configuration
configure > context context_name > lac-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lac-service)#
Syntax
allow { aaa-assigned-hostname | called-number value apn | calling-number value imsi }
default allow { aaa-assigned-hostname | called-number value apn }
no allow { aaa-assigned-hostname | called-number value apn | calling-number }
no
Disable the configured attribute and returns to the behavior that uses the LAC-Service name as the HostName
AVP.
AVP.
aaa-assigned-hostname
When enabled if AAA assigns a valid Tunnel-Client-Auth-ID attribute for the tunnel, it is used as the
HostName AVP in the L2TP tunnel setup message.
This keyword works in conjunction with the
HostName AVP in the L2TP tunnel setup message.
This keyword works in conjunction with the
local-hostname
hostname
keyword applied via the
tunnel
l2tp
command in APN Configuration mode.
When Tunnel parameters are not received from the RADIUS Server, Tunnel parameters configured in an
APN are considered for the LNS peer selection. When APN configuration is selected, the local-hostname
configured with the
APN are considered for the LNS peer selection. When APN configuration is selected, the local-hostname
configured with the
tunnel l2tp
command in the APN for the LNS peer will be used as an LAC
Hostname.
called-number value apn
Configures the system to send the APN name in the Called-Number AVP as a part of ICRQ message sent to
the LNS. If this keyword is not configured, Called-Number AVP will not be included in ICRQ message sent
to the LNS.
the LNS. If this keyword is not configured, Called-Number AVP will not be included in ICRQ message sent
to the LNS.