Cisco Cisco ASR 5000
Context Configuration Mode Commands E-H
▀ gtpp egcdr
▄ Command Line Interface Reference, StarOS Release 18
2480
gtpp egcdr
Configures the eG-CDR and P-CDR (P-GW CDR) parameters and triggers.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gtpp egcdr { closure-reason admin-disconnect [ management-intervention | normal-release ]
| final-record [ [ include-content-ids { all | only-with-traffic } ] [ closing-cause {
same-in-all-partials | unique } ] ] | losdv-max-containers max_losdv_containers | lotdv-
max-containers max_lotdv_containers | dynamic-path ddl-path | rulebase-max-length
rulebase_name_max_length | service-data-flow threshold { interval interval | volume {
downlink bytes [ uplink bytes ] | total bytes | uplink bytes [ downlink bytes ] } } |
service-idle-timeout { 0 | service_idle_timeout } }
| final-record [ [ include-content-ids { all | only-with-traffic } ] [ closing-cause {
same-in-all-partials | unique } ] ] | losdv-max-containers max_losdv_containers | lotdv-
max-containers max_lotdv_containers | dynamic-path ddl-path | rulebase-max-length
rulebase_name_max_length | service-data-flow threshold { interval interval | volume {
downlink bytes [ uplink bytes ] | total bytes | uplink bytes [ downlink bytes ] } } |
service-idle-timeout { 0 | service_idle_timeout } }
default gtpp egcdr { closure-reason admin-disconnect | dynamic-path | final-record
include-content-ids only-with-traffic closing-cause same-in-all-partials | losdv-max-
containers | lotdv-max-containers | service-idle-timeout 0 }
include-content-ids only-with-traffic closing-cause same-in-all-partials | losdv-max-
containers | lotdv-max-containers | service-idle-timeout 0 }
no gtpp egcdr { dynamic-path | rulebase-max-length | service-data-flow threshold {
interval | volume { downlink [ uplink ] | total | uplink [ downlink ] } } }
interval | volume { downlink [ uplink ] | total | uplink [ downlink ] } } }
closure-reason admin-disconnect [ management-intervention | normal-release ]
Controls the configuration of “causeForRecordClosing” in PGW-CDR when a call is cleared from the
chassis.
Releases prior to 14.1, when a call is cleared from the chassis the field “causeForRecordClosing” in a PGW-
CDR shows “Normal Release”. In 15.0 and later releases, the behavior has changed to comply with the 3GPP
specifications. That is, the default “causeForRecordClosing” in PGW-CDR will be “Management
Intervention”.
chassis.
Releases prior to 14.1, when a call is cleared from the chassis the field “causeForRecordClosing” in a PGW-
CDR shows “Normal Release”. In 15.0 and later releases, the behavior has changed to comply with the 3GPP
specifications. That is, the default “causeForRecordClosing” in PGW-CDR will be “Management
Intervention”.
Important:
This behavioral change is limited to PGW-CDR Release 8 dictionaries only.
closing-reason
: Configures the record closing reason for PGW-CDR.
management-intervention
: Specifies to send Management-Intervention as causeForRecordClosing
in PGW-CDRs. By default, Management-Intervention will be sent as the record closure reason for
PGW-CDRs.
PGW-CDRs.