Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (L-S)
ps-network ▀
Command Line Interface Reference, StarOS Release 18 ▄
5493
This configuration enables the Iu-PS/Iu-Flex interface on HNB-GW service with CS core network elements;
i.e. MSC/VLR.
A maximum of 1 HNB-PS networks instance which is further limited to a maximum of 256 services
(regardless of type) can be configured per system.
i.e. MSC/VLR.
A maximum of 1 HNB-PS networks instance which is further limited to a maximum of 256 services
(regardless of type) can be configured per system.
Caution:
This is a critical configuration. The HNBs can not access SGSNs in PS core network without this
configuration. Any change to this configuration would lead to disruption in HNB access to PS core network.
Entering this command results in the following prompt:
[context_name]hostname(config-ps-network)#
The various parameters available for configuration of an HNB-PS network instance are defined in the HNB-
PS Network Configuration Mode Commands chapter.
PS Network Configuration Mode Commands chapter.
Example
The following command enters the existing HNB-PS Network configuration mode (or creates it if it doesn’t
already exist) for the instance named
already exist) for the instance named
hnb-ps1
:
ps-network hnb-ps1
The following command will remove HNB-PS network instance
hnb-ps1
from the system without any
prompt to user:
no ps-network hnb-ps1