Cisco Cisco Packet Data Gateway (PDG)
OSPFv3 Configuration Mode Commands
area ▀
Command Line Interface Reference, StarOS Release 18 ▄
7589
dead-interval
virtuallink_dead_interval
: Sets the virtual link dead-interval (in seconds) as
an integer from 1 through 65535.
hello-interval
virtuallink_hello_interval
: Sets the virtual link hello interval (in seconds)
as an integer from 1 through 65535.
retransmit-interval
virtuallink_retransmit_interval
: Sets the virtual link retransmit
interval (in seconds) as an integer from 1 through 3600.
transmit-delay
virtuallink_transmit_delay
: Sets the virtual link transmit delay (in seconds)
as n integer from 1 through 3600.
Usage
Use this command to establish OPSFv3 areas and enable authentication.
Example
The following command enables authentication for an OSPFv3 area defined by the IP address
192.168.100.10 with default cost of 256
192.168.100.10 with default cost of 256
area 192.168.100.10 default-cost 256