Cisco Cisco ASR 5700
eGTP Service Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 17
3638
associate
Configures an association with a GTP-U service where parameters are applied to the GTP-U data flow. For an SGSN
being configured for S4 functionality, this command associates a configured GTP-U service that will enable
communication with the SGW over the S4 interface.
being configured for S4 functionality, this command associates a configured GTP-U service that will enable
communication with the SGW over the S4 interface.
Product
ePDG
P-GW
SAEGW
SGSN
Important:
For StarOS releases prior to 16, the ePDG and SGSN are only supported on the ASR 5500 platform.
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > eGTP Service Configuration
configure > context context_name > egtp-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-egtp-service)#
Syntax
associate gtpu-service name
no associate gtpu-service
no
Removes the association to the configured GTP-U service from this service.
gtpu-service name
Associates a GTP-U service with this eGTP service.
name
must be an alphanumeric string of 1 through 63
characters.
Usage
Use this command to associate a GTP-U service with this eGTP service.
Example
The following command associates this eGTP service with a GTP-U service named
gtpu3
:
associate gtpu-service gtpu3