Cisco Cisco ASR 5700
IuPS Service Configuration Mode Commands
reset ▀
Command Line Interface Reference, StarOS Release 17 ▄
6773
reset
Defines the configuration specific to the RESET procedure.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
reset { ack-timeout time | guard-timeout time | max-retransmissions retries | sgsn-
initiated }
initiated }
default reset { ack-timeout | guard-timeout | max-retransmissions | sgsn-initiated }
no reset sgsn-initiated
default
Returns to the default settings for the Reset procedure.
no
Removes the SGSN-initiated reset procedure from the configuration.
ack-timeout time
Configures the interval (in seconds) for which the SGSN waits for RESET-ACK from the RNC.
time
must be an integer from 5 to 60.
Default: 20.
guard-timeout
Configures the interval (in seconds) after which the SGSN sends RESET-ACK to the RNC.
time
must be an integer from 5 to 60.
Default : 10
max-retransmissions
Configures maximum retries for RESET message.
retries
must be an integer from 0 to 2.
Default: 1.
sgsn-initiated
Enables SGSN initiated RESET procedure.