Cisco Cisco ASR 5700
SS7 Routing Domain Configuration Mode Commands
▀ inbound-asp-identifier validate
▄ Command Line Interface Reference, StarOS Release 17
8660
inbound-asp-identifier validate
This command enables validation of ASP identifiers inbound to the SGSN via routes defined with this SS7 routing
domain.
domain.
Important:
This command is only available in Release 8.1 and higher releases.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-routing-domain-ss7rd_id)#
Syntax
inbound-asp-identifier validate
default inbound-asp-identifier validate
no inbound-asp-identifier validate
default
Validates the inbound ASP Id.
no
Disables validation of the inbound ASP Id.
Usage
The standard is to validate the ASP Id. However, in some circumstances it is necessary to skip such
validation. For example, if the same ASP Id is assigned to more than one RNC (peer-server).
validation. For example, if the same ASP Id is assigned to more than one RNC (peer-server).
Example
Use the following command to skip validation of inbound ASP Ids:
no inbound-asp-identifier validate
Use either of the following commands to enable validation if it has been disabled:
default inbound-asp-identifier validate
inbound-asp-identifier validate