Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (M-P)
▀ show map-service
▄ Command Line Interface Reference, StarOS Release 17
4716
show map-service
Displays information configured for the Mobile Application Part (MAP) services, including MAP service features and
operational configuration. Also includes some related configuration information for the HLR and EIR configuration
parameters.
operational configuration. Also includes some related configuration information for the HLR and EIR configuration
parameters.
Product
SGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show map-service [ all | name srvc_name ] [ | { grep grep_options | more } ]
name srvc_name
Specifies an existing MAP service as an alphanumeric string of 1 through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display all MAP service or the statistics for a particular MAP service.
Example
The following command displays configuration information for the MAP service named
map-svc-1
:
show map-service name map-srv-1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.