Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (T-Z)
update active-charging ▀
Command Line Interface Reference, StarOS Release 16 ▄
4139
imsi imsi
Updates rulebase/policy for International Mobile Subscriber Identification (IMSI) specified here.
imsi
must be 3 digits of MCC (Mobile Country Code), 2 or 3 digits of MNC (Mobile Network Code), and
the rest with MSIN (Mobile Subscriber Identification Number). The total should not exceed 15 digits. For
example, 123-45-678910234 can be entered as 12345678910234.
example, 123-45-678910234 can be entered as 12345678910234.
ip-address iP_address
Updates rulebase/policy for the IP address specified in IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
hexadecimal notation.
msid msid
Updates rulebase/policy for an MSID specified as a string of 1 through 24 characters.
rulebase rulebase_name
Updates rulebase/policy for sessions matching an existing rulebase specified as an alphanumeric string of 1
through 63 characters.
through 63 characters.
tpo-policy
tpo_policy_name
Important:
The Traffic Performance Optimization (TPO) in-line service is not supported in this release.
username user_name
Updates rulebase/policy for user specified as a an alphanumeric of characters and/or wildcard characters ('$'
and '*') of 1 through 127 characters.
and '*') of 1 through 127 characters.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Use this command to change specified active charging option(s) for the matching sessions.
Example
The following command changes the rulebase for sessions using the rulebase named
standard
to use the
rulebase named
super
:
update active-charging switch-to-rulebase super rulebase standard