Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (D-G)
show dhcp ▀
Command Line Interface Reference, StarOS Release 16 ▄
4415
chaddr mac_address
Displays information for a mobile node specified by its MAC address.
dhcp-service svc_name
Displays information for an existing DHCP service specified as an alphanumeric string of 1 through 63
characters that is case sensitive.
characters that is case sensitive.
imsi
imsi
Displays information for an International Mobile Subscriber Identity (IMSI) specified as a string of 1 to 15
digits.
digits.
msid
msid
Displays information for a Mobile Subscriber Identity (MSID) specified as a string of 1 to 15 digits.
server
server_address
Displays information for a DHCP server specified by its IP address in IPv4 dotted-decimal notation.
statistics [ dhcp-service
svc_name
| server
server_address
Displays DHCP statistics for either a specific or for all DHCP services and servers configured.
dhcp-service
svc_name
: Displays statistics for a DHCP service specified as an alphanumeric string of 1
through 63 characters that is case sensitive.
server
server_address
: Displays statistics for a DHCP server specified by its IP address in IPv4 dotted-
decimal notation.
status [ dhcp-service
svc_name
| server
server_address
Displays configuration information for either a specific or for all DHCP services and servers configured.
dhcp-service
svc_name
: Displays statistics for a DHCP service specified as an alphanumeric string of 1
through 63 characters that is case sensitive.
server
server_address
: Displays statistics for a DHCP server specified by its IP address in IPv4 dotted-
decimal notation.
user-address
address
Displays information for a DHCP-assigned user IP address specified in IPv4 dotted-decimal notation.
username
name
Displays information for a subscriber specified as an alphanumeric string of 1 through 127 characters
(including wildcards “$” and “*”) that is case sensitive.
(including wildcards “$” and “*”) that is case sensitive.
wf1
Displays all available information for associated filter keyword in wide-format number 1.
| { grep
grep_options
| more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of
output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.