Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (M-P)
▀ show mpls ldp
▄ Command Line Interface Reference, StarOS Release 16
4664
Usage
This command displays statistical information for an MPLS Label Distribution Protocol configuration. The
information includes Prefix, LDP ID, Label, Nexthop, and Egress_if_index for all MPLS LDP Bindings
configurations.
information includes Prefix, LDP ID, Label, Nexthop, and Egress_if_index for all MPLS LDP Bindings
configurations.
Example
The following command displays information about MPLS LDP protocol related configurations:
show mpls ldp discovery neighbor ldp-id 10.2.3.4 detail bindings ldp-id
31.32.33.34 prefix 192.168.102.232 local remote
31.32.33.34 prefix 192.168.102.232 local remote
The following command displays the MPLS LDP discovery information, including, LDP Peer IDs, Hold time
(in seconds), Proposed Local/Peer, and Remaining (time in seconds):
(in seconds), Proposed Local/Peer, and Remaining (time in seconds):
show mpls ldp discovery
The following command displays the remotely assigned label values in the MPLS LDP binding
configuration:
configuration:
show mpls ldp bindings remote
Important:
Output descriptions for these commands are available in the Statistics and Counters Reference.