Cisco Cisco Packet Data Gateway (PDG)
HNB-CS Network Configuration Mode Commands
msc deadtime ▀
Command Line Interface Reference, StarOS Release 16 ▄
6231
Timer value sets the duration in seconds for a timer which started once HNB-GW receives PC-STATE-
DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer MSC. On expiry of this timer
the peer MSC is marked as dead and all Iu-CS connections towards that MSC shall be released.
DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer MSC. On expiry of this timer
the peer MSC is marked as dead and all Iu-CS connections towards that MSC shall be released.
Important:
This command can be entered only once. Reentering this command overwrites the previous
parameters.
Example
The following command configures the deadtime timer value for
10
seconds on HNB-GW. Once HNB-GW
receives PC-STATE-DOWN or SSN-STATE-DOWN (RANAP) indication from SCCP for a peer MSC the
HNB-GW waits for configured period and on expiry of timer it marks the specific MSC as dead:
HNB-GW waits for configured period and on expiry of timer it marks the specific MSC as dead:
msc deadtime 10