Cisco Cisco Packet Data Gateway (PDG)
SS7 Routing Domain Configuration Mode Commands
description ▀
Command Line Interface Reference, StarOS Release 16 ▄
8451
description
This command defines an alphanumeric string that describes the current SS7 routing domain. This is used for operator
reference only.
reference only.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-routing-domain-ss7rd_id)#
Syntax
description string
no description
no
Removes the description string from the current SS7 routing domain configuration.
string
Specifies the alphanumeric string that is stored. Strings with spaces must be enclosed in double-quotes (see
the example below).
the example below).
string:
Must be from 1 to 255 alphanumeric characters.
Usage
Use this command to set a description for reference by operators.
Example
The following command sets the description to identify a routing domain for messages transmitted within a
national boundary.
national boundary.
description “National Service Routing Domain”