Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (D-G)
show gtpp group ▀
Command Line Interface Reference, StarOS Release 16 ▄
4495
show gtpp group
Displays information pertaining to the configured GTPP storage server group.
Product
GGSN
P-GW
SAEGW
SGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show gtpp group { name gtpp_group_name | all } [ | { grep grep_options | more } ]
name gtpp_group_name
Displays information and CDR statistics for an existing GTPP server group name specified as an
alphanumeric string of 1 through 64 characters.
alphanumeric string of 1 through 64 characters.
all
Displays statistics for all configured GTPP storage server groups, including default group.
| { grep grep_options | more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For more information on the usage of
output of this command will be sent.
For more information on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section
of the Command Line Interface Overview chapter.
Usage
Use this command to display the CDR statistics on the basis of GTPP server groups. It shows the information
for all or specific GTPP server group configured in the context from which this command is issued.
for all or specific GTPP server group configured in the context from which this command is issued.
Example
The following command displays the status of the GTPP server group backup server configured in a context
called
called
GTPP_Group1
:
show gtpp group name GTPP_Group1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.