Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Packet Filter Configuration Mode Commands
▀ direction
▄ Command Line Interface Reference, StarOS Release 16
602
direction
This command allows you to specify the direction in which the current packet filter will be applied.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Packet Filter Configuration
active-charging service service_name > packet-filter packet_filter_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-packet-filter)#
Syntax
direction { bi-directional | downlink | uplink }
default direction
default
Configures this command with its default setting.
Default:
Default:
bi-directional
bi-directional
Specifies that the packet filter has to be applied in both uplink and downlink directions.
downlink
Specifies that the packet filter has to be applied only in the downlink direction.
uplink
Specifies that the packet filter has to be applied only in the uplink direction.
Usage
Use this command to specify the direction in which the packet filter has to be applied.
Example
The following command specifies that the packet filter must be applied in the downlink direction:
direction downlink