Cisco Cisco Packet Data Gateway (PDG)
SaMOG Gateway Overview
How the SaMOG Gateway Works ▀
SaMOG Administration Guide, StarOS Release 19 ▄
43
Figure 10. WLC Initiated Session Disconnection
Table 11. WLC Initiated Session Disconnection
Step
Description
1.
The WLC sends a “PMIPv6 Proxy Binding Update” message with lifetime = 0 with NAI and the allocated IP-Address to
the CGW.
the CGW.
2.
The CGW responds with a “PMIPv6 Proxy Binding Ack” message and cleans up the session and the associated GRE
tunnel.
tunnel.
3.
The CGW initiates a “Binding Cache Entry” timer based on the configured “Binding Cache Entry Timeout” (session-delay-
Timeout) value under the CGW Service Configuration Mode.
Timeout) value under the CGW Service Configuration Mode.
4.
The WLC triggers a “Radius Accounting-Request” message with the “Acct-Status-Type” as “STOP” and an appropriate
“Terminate-Cause”.
“Terminate-Cause”.
5.
The CGW initiates a “GTPv2 Delete Session Request” message to remove the session resources from the P-GW.
6.
The P-GW responds with a “GTPv2 Delete Session Response” message and intimates the MRME.
7.
The MRME proxies the received “Radius Accounting-Request” message to the RADIUS accounting server.
8.
The MRME service initiates a “Disconnect Delay” timer, based on the configured “Disconnect Delay Timeout” value under
the MRME Service Configuration Mode.
the MRME Service Configuration Mode.