Cisco Cisco Packet Data Gateway (PDG) 전단
Call Control Profile Configuration Mode
associate ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1793
The
s13-prime-interface
is used by the SGSN to communicate with the equiprement identity register
(EIR). It is a Diameter-based interface which performs the mobile equipment (ME) identity check procedure.
Important:
The
s13-prime-interface
can only be used if an
s6d-interface
is configured.
tai-mgmt-db
tai-db_name
Identifies the tracking area identifier (TAI) database that should be associated with this call control profile.
tai-db_name
is a string of 1 to 64 characters (any combination of letters and digits).
This configuration overrides the S-GW selection and TAI list assignment functionality for a call that uses an
operator policy associated with this call control profile. The TAI management object provides a TAI list for
calls and provides S-GW selection functionality if a DNS is not configured for S-GW discovery for this
operator policy or if a DNS discovery fails.
If a TAI management database is associated with a call-control-profile, and if DNS is used for S-GW
lookups, then the DNS configuration for S-GW lookups must also be configured within the same call-control-
profile using the
operator policy associated with this call control profile. The TAI management object provides a TAI list for
calls and provides S-GW selection functionality if a DNS is not configured for S-GW discovery for this
operator policy or if a DNS discovery fails.
If a TAI management database is associated with a call-control-profile, and if DNS is used for S-GW
lookups, then the DNS configuration for S-GW lookups must also be configured within the same call-control-
profile using the
dns-sgw
command in the call-control-profile configuration mode.
On the S4-SGSN, use this option to associate a locally configured S-GW address for the RAI address for
selection if operators wish to bypass DNS resolution of RAI FQDN. This option is valid only after the
following commands have been executed on the S4-SGSN:
selection if operators wish to bypass DNS resolution of RAI FQDN. This option is valid only after the
following commands have been executed on the S4-SGSN:
The
tai-mgmt-db
command in LTE Policy Configuration Mode
The
tai-mgmt-obj
command in LTE TAI Management Database Configuration Mode.
The
tai
and
sgw-address
commands in LTE TAI Management Object Configuration Mode.
Usage
Use this command to associate handover restriction lists, HSS service (and interfaces), and a TAI database
with the call control profile. This ensures that the information is available for application when a Request is
received.
Repeat the command as needed to associate each feature.
with the call control profile. This ensures that the information is available for application when a Request is
received.
Repeat the command as needed to associate each feature.
Example
Link HO restriction list named
HOrestrict1
with this call control profile:
associate ho-restrict-list HOrestrict1
The following command associates this SaMOG call control profile with an accounting policy called
acct1
: