Cisco Cisco Packet Data Gateway (PDG) 전단
Ethernet Interface Configuration Mode Commands
▀ vlan-map
▄ Cisco ASR 5x00 Command Line Interface Reference
3528
vlan-map
Sets a single next-hop IP address so that multiple VLANs can use a single next-hop gateway. The vlan-map is
associated with a specific interface.
associated with a specific interface.
Product
PDSN
HA
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-eth)#
Syntax
vlan-map next-hop ip_address
next-hop
ip_address
Specifies the IP address for the next-hop gateway in IPv4 dotted-decimal notation.
Usage
Use this command to combine multiple VLAN links to go through a single IP address. This feature is used in
conjunction with nexthop forwarding and overlapping IP pools.
After configuring the vlan-map, move to the Ethernet Port Configuration mode to attach the vlan-map to a
specific VLAN.
conjunction with nexthop forwarding and overlapping IP pools.
After configuring the vlan-map, move to the Ethernet Port Configuration mode to attach the vlan-map to a
specific VLAN.
Example
The following command sets an IPv4 address for a next-hop gateway.
vlan-map next-hop 123.123.123.1