Cisco Cisco Packet Data Gateway (PDG) 전단
Exec Mode Commands (D-S)
hd raid ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3887
hd_num
specifies the RAID is to be established on the FSC in slot numbers 13 through 18 (hd13, hd14, ...
hd18).
insert { | local1 | local2 }
On VPC, inserts the specified vHD into the running RAID causing it to recover from degraded mode.
overwrite local1
|
remote1
On the ASR 5000, overwrites the specified disk and adds it to the current running RAID to construct a fully
mirrored array.
mirrored array.
local1
specifies the primary SMC is to be added to the current RAID.
remote1
specifies the backup SMC
is to be added to the current RAID.
overwrite hd_num
On the ASR 5500, overwrites the specified FSC disk array and adds it to the current running RAID to
construct a fully mirrored array.
construct a fully mirrored array.
hd_num
specifies the RAID is to be established on the FSC in slot numbers 13 through 18 (hd13, hd14, ...
hd18).
overwrite { | local1 | local2 }
On VPC, overwrites the specified vHD and adds it to the current running RAID to construct a fully mirrored
array.
array.
remove
local1
|
remote1
On the ASR 5000, removes the specified disk from the running RAID causing it to run in degraded mode or
to fail.
to fail.
local1:
specifies the primary SMC is to be removed from the RAID.
remote1:
specifies the backup SMC
is to be removed from the RAID.
remove
hd_num
On the ASR 5500, removes the specified FSC disk array from the running RAID causing it to run in degraded
mode or to fail.
mode or to fail.
hd_num
specifies the RAID is to be established on the FSC in slot numbers 13 through 18 (hd13, hd14, ...
hd18).
remove
{ | local1 | local2 }
On the VPC, removes the specified vHD from the running RAID causing it to run in degraded mode or to
fail.
fail.
select local1
|
remote1
On the ASR 5000, selects the specified disk to assemble a RAID when two unrelated RAID disks are present
in the system. The resulting RAID runs in degraded mode.
in the system. The resulting RAID runs in degraded mode.
local1:
specifies the primary SMC is to assemble the RAID.
remote1:
specifies the backup SMC is to
assemble the RAID.
select hd_num
On the ASR 5500, selects the specified FSC disk array to assemble a RAID when two or more unrelated
RAID disks are present in the system. The resulting RAID runs in degraded mode.
RAID disks are present in the system. The resulting RAID runs in degraded mode.