Cisco Cisco Packet Data Gateway (PDG) 전단
Exec Mode show Commands (M-P)
▀ show mme-service session
▄ Cisco ASR 5x00 Command Line Interface Reference
4528
ue-ecm-state { connected | idle }
Displays summarized or detailed configuration information about MME sessions running and filtered by the
UE’s EPS Connected Management (ECM) state.
UE’s EPS Connected Management (ECM) state.
connected
: Specifies that summarized or detailed configuration information about MME sessions is to be
displayed based on the UE ECM state of “connected”.
idle
: Specifies that summarized or detailed configuration information about MME sessions is to be
displayed based on the UE ECM state of “idle”.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of the
the output will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section in the Command Line Interface Overview chapter.
Usage
Use this command to view information for MME sessions within MME services on this system.
Example
The following command displays detailed session statistics for an MME service running on this system:
show mme-service session full
Important:
Output descriptions for these commands are available in the Statistics and Counters Reference.
The following command displays detailed session counters for an MME service running on this system:
show mme-service session counters