Cisco Cisco Packet Data Gateway (PDG) 전단
Subscriber Configuration Mode Commands
▀ mobile-ip
▄ Cisco ASR 5x00 Command Line Interface Reference
8304
gratuitous-arp aggressive
Default: Disabled.
When enabled, this mode will cause the HA to send out gratuitous ARP (Address Resolution Protocol)
messages for all Mobile IP (MIP) registration renewals and handoffs.
To disable this mode, use the
When enabled, this mode will cause the HA to send out gratuitous ARP (Address Resolution Protocol)
messages for all Mobile IP (MIP) registration renewals and handoffs.
To disable this mode, use the
no
form of this command.
Important:
This mode will only work for IP addresses that have been assigned from a static IP address pool.
home-agent
ip_address
[alternate]
Specifies the IP address of the mobile IP user’s home agent.
ip_address
must be entered using IPv4 dotted-
decimal or IPv6 colon -separated notation.
alternate
- Specifies the secondary, or alternate, Home Agent to use when Proxy Mobile IP HA Failover is
enabled.
match-aaa-assigned-address
Default: Disabled.
Enables the FA to validate the home address in the RRQ against the one assigned by AAA server. This
should only be configured on the FA side.
Enables the FA to validate the home address in the RRQ against the one assigned by AAA server. This
should only be configured on the FA side.
min-reg-lifetime-override [value | infinit ]
Default: 0.
Configures the subscriber for minimum registration lifetime parameter on HA service. By default it uses the
value configured on HA service where
Configures the subscriber for minimum registration lifetime parameter on HA service. By default it uses the
value configured on HA service where
value
must be the minimum registration lifetime that the HA service
allows in any Registration Request message from the mobile node. An infinite registration lifetime can be
configured by setting the value as “infinite”.
configured by setting the value as “infinite”.
value
is a minimum registration lifetime value in seconds and must be an integer between 1 through 65534.
mn-aaa-removal-indication
Default: Disabled.
When enabled, the MN-FA challenge and MN-AAA Authentication extensions are removed when relaying a
Registration Request (RRQ) to the Home Agent (HA)
When enabled, the MN-FA challenge and MN-AAA Authentication extensions are removed when relaying a
Registration Request (RRQ) to the Home Agent (HA)
mn-ha-hash-algorithm { hmac-md5 | md5 | rfc2002-md5 }
Speechifies the encryption algorithm to use.
Default:
Default:
hmac-md5
hmac-md5
: Uses HMAC-MD5 hash algorithm, as defined in RFC-2002bis. This is the default algorithm.
md5
: Uses the MD-5 hash algorithm.
rfc2002-md5
: Uses the MD-5 hash algorithm variant as defined in RFC-2002.
mn-ha-shared-key key
Verifies the MN-HA Authentication for a local subscriber in the current context.
key
is an alphanumeric
string or a hexadecimal number beginning with "0x" up to 127 bytes
mn-ha-spi spi_num
Specifies the Security Parameter Index (SPI) number.
spi_num
must be an integer from 256 through
4294967295.