Cisco Cisco Tunnel Terminating Gateway (TTG) 전단
GTP-U Service Configuration Mode Commands
▀ sequence-number
▄ Cisco ASR 5x00 Command Line Interface Reference
5882
sequence-number
Enables addition of the sequence number to every GTP-U packet. Default is disabled.
Product
GGSN
HSGW
P-GW
SAEGW
SGSN
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > GTP-U Service Configuration
configure > context context_name > gtpu-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpu-service)#
Syntax
[ no ] sequence-number
no
Disables addition of the sequence number to every GTP-U packet.
Usage
Use this command to enable/disable addition of the sequence number to every GTP-U packet coming from Gi
interface and going towards Gn/Gp interface. If GTP-U packets are received out of sequence, sequence
numbers would allow the packets to be reorded.
interface and going towards Gn/Gp interface. If GTP-U packets are received out of sequence, sequence
numbers would allow the packets to be reorded.
Example
The following command enables addition of the sequence number to every GTP-U packet:
sequence-number