Cisco Cisco Packet Data Interworking Function (PDIF) 전단
APN Configuration Mode Commands
network-behind-mobile ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1351
network-behind-mobile
Allows enabling/disabling the Network Behind Mobile Station (NBMS) for the APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
network-behind-mobile { max-addresses-behind-mobile max_addrs | max-subnets max_subnets }
[ default | no ] network-behind-mobile
default
Enables the default settings for this function. It enables NBMS with max-subnets as 10 and max-addresses-
behind-mobile as 16,777,214 default values.
behind-mobile as 16,777,214 default values.
no
Disables the network behind mobile station functionality on the APN.
max-addresses-behind-mobile max_addrs
Configures the maximum number of addresses that are allowed in a single Network/subnet Behind MS.
max_addrs
must be an integer from 1 through 16,777,214.
Default: 16,777,214
max-subnets max_subnets
Specifies the maximum number of subnets that can be enabled for a call in the APN.
max_subnets
must be an integer from1 through 16.
Default: 10
Usage
Use this command to enable or disable NBMS for the APN.
Example
The following command enables NBMS and allows a maximum of 16 routes to be installed on the APN
wherein maximum 268,435,454 host addresses are allowed in each network:
wherein maximum 268,435,454 host addresses are allowed in each network: