Cisco Cisco Packet Data Gateway (PDG) 릴리스 노트
P-GW Changes in Release 15.0
▀ P-GW Enhancements for September 30, 2013
▄ Cisco ASR 5x00 Release Change Reference
412
Support added to
show subscribers
CLI command to find sessions in P-GW specific to MAG address, and also to
clear subscribers
to clear sessions specific to a MAG address.
P-GW Command Changes as of September 30, 2013
This section provides information on P-GW command changes in release 15.0.
Important:
For more information regarding commands in this section, refer to the Command Line Interface
Reference for this release.
New P-GW Commands
This section identifies new P-GW commands available in release 15.0.
description
The following new command configures a short description for the specified peer profile.
configure
peer-profile service-type pgw-access { default | name profile_name } [ -noconfirm ]
description description
no description
end
gtpc
The following new command configures the GTP-C settings for the specified peer profile.
configure
peer-profile service-type pgw-access { default | name profile_name } [ -noconfirm ]
gtpc { echo { interval seconds | retransmission-timeout seconds } | max-
retransmissions number | retransmission-timeout seconds }
retransmissions number | retransmission-timeout seconds }
default gtpc { echo [ interval | retransmission-timeout ] | max-retransmissions |
retransmission-timeout }
retransmission-timeout }
no gtpc echo
end
Notes:
gtpc echo interval seconds
must be an integer from 60 to 3600. Default: 60
gtpc echo retransmission-timeout seconds
must be an integer from 1 to 20.
Default: 5