Cisco Cisco Aironet 350 Wireless LAN Client Adapter 릴리즈 노트
6
Release Notes for Cisco Aironet PCM/LMC/PCI Client Adapter Firmware, Version 4.25.30
OL-2411-01
Upgrading to a New Firmware Release
Upgrade Procedure for Windows CE
Step 1
Use a serial or USB cable to connect your Windows CE device to a laptop or PC running Microsoft
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
Step 2
Perform one of the following:
•
If you want to establish a partnership that allows you to synchronize files between the laptop or PC
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
•
If you do not want to synchronize files and want to connect as a “guest,” select No and click Next.
The screen indicates that you are connected as a guest.
The screen indicates that you are connected as a guest.
Step 3
Use the laptop or PC’s web browser to access the following URL:
Step 4
Locate the section for client adapter firmware.
Step 5
Click the link for your client adapter’s series (for example, 350 Series).
Step 6
Click the latest radio firmware file for your client adapter.
Note
The firmware for PC, LM, and PCI cards is labeled PCM-LMC-PCI.
Note
If your wireless network uses LEAP authentication, remember to select a radio firmware file
of the same draft standard as the access points to which your client adapter will be
authenticating.
of the same draft standard as the access points to which your client adapter will be
authenticating.
Step 7
Read and accept the terms and conditions of the Software License Agreement.
Step 8
Select the firmware file to download it.
Step 9
Save the file to a floppy disk or to the hard drive of your laptop or PC.
Step 10
Locate the file using Windows Explorer, double-click it, and extract the image file (*.img) to a folder.
Step 11
In the ActiveSync window on the laptop or PC, click the Explore button to view the files on the Windows
CE device.
CE device.
Step 12
Drag and drop the firmware image from Windows Explorer to a location in the ActiveSync window.
Note
If your Windows CE device is a PPC running Windows CE 3.0, you must copy the firmware
image to the My Documents folder or a folder under My Documents.
image to the My Documents folder or a folder under My Documents.
Step 13
After the file is copied, disconnect the Windows CE device.
Step 14
Make sure the client adapter is installed in your Windows CE device and is operational.
Step 15
On your Windows CE device, select Start > Programs > Cisco > Load New Firmware.
Step 16
Click the Select Firmware button.