Cisco Cisco WAP200 Wireless-G Access Point - PoE Rangebooster 관리 매뉴얼
5
Chapter 2: Planning Your Wireless Network
Network Layout
Network Layout
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Network Layout
The Wireless-G Access Point with Power Over Ethernet and Rangebooster has been designed for use with
802.11g and 802.11b products. The Access Point is compatible with 802.11g and 802.11b adapters, such as the
notebook adapters for your laptop computers, PCI adapters for your desktop PCs, and USB adapters for all PCs
when you want to enjoy wireless connectivity. These wireless products can also communicate with an 802.11g or
802.11b wireless print server (if available).
802.11g and 802.11b products. The Access Point is compatible with 802.11g and 802.11b adapters, such as the
notebook adapters for your laptop computers, PCI adapters for your desktop PCs, and USB adapters for all PCs
when you want to enjoy wireless connectivity. These wireless products can also communicate with an 802.11g or
802.11b wireless print server (if available).
To link your wired network with your wireless network, connect the Access Point’s Ethernet network port to any
switch or router with Power over Ethernet (PoE)—or a PoE injector, such as the Linksys WAPPOE or WAPPOE12.
Note that the 12 VDC on the WAPPOE12 is for the splitter output. Both PoE Injectors provide 48 VDC power output.
switch or router with Power over Ethernet (PoE)—or a PoE injector, such as the Linksys WAPPOE or WAPPOE12.
Note that the 12 VDC on the WAPPOE12 is for the splitter output. Both PoE Injectors provide 48 VDC power output.
With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com for more information about wireless products.
www.linksys.com for more information about wireless products.