Cisco Cisco WET200 Wireless-G Business Ethernet Bridge 설치 가이드

 For details on placement options such as using the stands 

or wall-mounting, please refer to the User Guide on the CD-ROM.

Connect one end of an Ethernet 

network cable to the LAN port on 

your PC, then connect the other 

end to Ethernet port 1, 2, 3, 4, or 5 

on the Bridge. 

 

Connect the power adapter to the 

Bridge’s Power port, and then plug 

the other end into an electrical 

outlet. 

The Power LED on the front panel 

will light up green as soon as 

the power adapter is connected 

properly.

Follow these instructions to set up the Bridge in Infrastructure mode. For 

information on advanced configuration refer to the User Guide on the CD-ROM.

Assign your PC a static IP address 

in the same subnet as the Bridge’s 

default IP address, 192.168.1.226. 

Open your web browser. Enter 

http://192.168.1.226 in its Address 

field. Press Enter.