Cisco Cisco WET200 Wireless-G Business Ethernet Bridge 릴리즈 노트
Release Notes for WET200 Firmware Version 2.0.8.0
3
Release Notes
Changes Since WET200 Firmware Version 2.0.5.0
Known Issues
•
If Web HTTPS Access is enabled, you can not access the user interface if
you upgrade from a version earlier than 2.0.5.0 to version 2.0.6.0.
Workaround—Upgrade to 2.0.5.0. Then upgrade to 2.0.6.0. Note: If you
already upgraded to 2.0.6.0 without first upgrading to 2.0.5.0, press the
reset button for approximately 10 seconds. The access mode is reset back
to the default HTTP.
you upgrade from a version earlier than 2.0.5.0 to version 2.0.6.0.
Workaround—Upgrade to 2.0.5.0. Then upgrade to 2.0.6.0. Note: If you
already upgraded to 2.0.6.0 without first upgrading to 2.0.5.0, press the
reset button for approximately 10 seconds. The access mode is reset back
to the default HTTP.
•
After saving your configuration on the WET200 you may notice sporadic
user interface refresh issues. Workaround—Refresh your browser.
user interface refresh issues. Workaround—Refresh your browser.
Other Updates
The following problems were fixed in firmware version 2.0.6.0.
•
The SSL certificate is now valid and shows the correct company
information.
information.
•
The SSL certificate can now be viewed by the user.
•
The Site Survey popup window now works correctly in Google Chrome.
Added Save and Cancel buttons.
Added Save and Cancel buttons.