Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼
Client Quality of Service
Client QoS Status
Cisco Small Business WAP371 Wireless Access Point Administration Guide
118
7
Client QoS Status
The Client QoS Status page shows the client QoS settings that are applied to each client
currently associated with the WAP device.
currently associated with the WAP device.
To show the Client QoS Status page, select Client QoS > Client QoS Status in the navigation
pane.
pane.
Use these fields to configure Client QoS Status:
•
Station—The Station menu contains the MAC address of each client currently
associated with the WAP device. To view the QoS settings applied to a client, select its
MAC address from the list.
associated with the WAP device. To view the QoS settings applied to a client, select its
MAC address from the list.
•
Global QoS Mode—Whether QoS is enabled globally on the WAP device. This status
is configured on the
is configured on the
page.
•
Client QoS Mode—Whether QoS is enabled on the associated VAP. This status is
configured on the Client QoS Association page.
configured on the Client QoS Association page.
•
Bandwidth Limit Down—The maximum allowed transmission rate from the WAP
device to the client in bits per second (bps). The valid range is from 0 to 4294967295
bps.
device to the client in bits per second (bps). The valid range is from 0 to 4294967295
bps.
•
Bandwidth Limit Up—The maximum allowed transmission rate from the client to the
WAP device in bits per second (bps). The valid range is from 0 to 4294967295 bps.
WAP device in bits per second (bps). The valid range is from 0 to 4294967295 bps.
•
ACL Type Up—The type of ACL that is applied to traffic in the inbound (client-to-
WAP) direction, which can be one of these options:
WAP) direction, which can be one of these options:
-
IPv4: The ACL examines IPv4 packets for matches to ACL rules.
-
IPv6: The ACL examines IPv6 packets for matches to ACL rules.
-
MAC: The ACL examines Layer 2 frames for matches to ACL rules.
•
ACL Name Up—The name of the ACL applied to traffic entering the WAP in the
inbound direction. When a packet or frame is received by the WAP, the ACL rules are
checked for a match. The packet or frame is processed if it is permitted and discarded
if it is denied.
inbound direction. When a packet or frame is received by the WAP, the ACL rules are
checked for a match. The packet or frame is processed if it is permitted and discarded
if it is denied.
•
ACL Type Down—The type of ACL to apply to traffic in the outbound (WAP-to-
client) direction, which can be one of these options:
client) direction, which can be one of these options:
-
IPv4: The ACL examines IPv4 packets for matches to ACL rules.
-
IPv6: The ACL examines IPv6 packets for matches to ACL rules.