Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 관리 매뉴얼
Status and Statistics
Traffic Statistics
Cisco Small Business WAP371 Wireless Access Point Administration Guide
27
2
Traffic Statistics
Use the Traffic Statistics page to view basic information about the WAP. It also provides a
real-time display of transmit and receive statistics for the Ethernet interface, the Virtual Access
Points (VAPs), and any WDS interfaces. All transmit and receive statistics reflect the totals
since the WAP was last started. If you reboot the WAP, these figures indicate transmit and
receive totals since the reboot.
real-time display of transmit and receive statistics for the Ethernet interface, the Virtual Access
Points (VAPs), and any WDS interfaces. All transmit and receive statistics reflect the totals
since the WAP was last started. If you reboot the WAP, these figures indicate transmit and
receive totals since the reboot.
To show the Traffic Statistics page, select Status and Statistics > Traffic Statistics in the
navigation pane.
navigation pane.
The Traffic Statistics page shows summary data and statistics for traffic in each direction.
•
Network Interface—Name of the Ethernet interface and each VAP and WDS interface.
WLAN0 and WLAN1 precede the VAP interface name to indicate the radio interface
(WLAN0 represents radio 1 and WLAN1 represents radio 2).
(WLAN0 represents radio 1 and WLAN1 represents radio 2).
•
Total Packets—The total packets sent (in Transmit table) or received (in Received
table) by this WAP device.
table) by this WAP device.
•
Total Bytes—The total bytes sent (in Transmit table) or received (in Received table) by
this WAP device.
this WAP device.
•
Total Dropped Packets—The total number of dropped packets sent (in Transmit table)
or received (in Received table) by this WAP device.
or received (in Received table) by this WAP device.
•
Total Dropped Bytes—The total number of dropped bytes sent (in Transmit table) or
received (in Received table) by this WAP device.
received (in Received table) by this WAP device.
•
Errors—The total number of errors related to sending and receiving data on this WAP
device.
device.
You can click Refresh to refresh the screen and show the most current information.
WorkGroup Bridge Transmit/Receive
The WorkGroup Bridge Transmit/Receive page shows packet and byte counts for traffic
between stations on a WorkGroup Bridge. For information on configuring WorkGroup
Bridges, see
between stations on a WorkGroup Bridge. For information on configuring WorkGroup
Bridges, see
.
To show the WorkGroup Bridge Transmit/Receive page, select Status and Statistics >
WorkGroup Bridge in the navigation pane.
WorkGroup Bridge in the navigation pane.
Each network interface that is configured as a WorkGroup Bridge interface shows these fields: