Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup 릴리즈 노트
2
Release Notes
Resolved Issues
•
CSCuo18780—Shut down LED feature
.
•
CSCun58608—
Power LED flashing even you set the static ipv4/ipv6 address.
•
CSCuo18776—Pop message for Merion POE type.
•
CSCuo89292
—
Client cannot connect to the SSID after Enabling/Disabling the
WorkGroup Bridge.
•
CSCuo44978
—
Add the description of Band Steer in the help file.
•
CSCuo44988
—
Label "Radio 1" is the 5GHz radio and "Radio 2" is the 2.4GHz radio
in the wizard.
•
CSCuo44991
—
Dual Radio SSID names should be clearly noted in the setup wizard.
Open Caveats
These are the open caveats for firmware version 1.0.1.5
Table 1
Open Caveats in Firmware Version 1.0.1.5
Ref Number
Description
CSCul73641
Symptom:
WAP371 Wireless reason 3:STA is leaving IBSS or ESS issue.
Workaround:
This issue occurs when there is much interference in the environment. Set up the
wireless network with a rational design.
CSCul48943
Symptom:
GUI responds really slow after clicking Save.
Workaround:
This issue occurs occasionally on specific PCs with different OS browsers.