Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 설치 가이드

Thank you for choosing the Cisco WAP351 Wireless-N Dual Radio Access 
Point with 5 Ports Switch. The Cisco WAP351 is an indoor concurrent
dual-band radio 802.11n access point with integrated PoE switch.

This guide provides the general layout of the Cisco WAP351, describe 
how to deploy the Cisco WAP351 in your network, and describe how to 
configure the Cisco WAP351. For additional information, see 

.

Before you begin the installation, make sure that you have the following 
equipment and services: 

• A computer with browser support for:

–

Internet Explorer 7.0 or later

–

Chrome 5.0 or later

–

Firefox 3.0 or later

–

Safari 3.0 or later

• Tools for installing the hardware

• One or more Ethernet network switches with PoE

The front panel of the Cisco WAP351 consists of three lights: Power, 
WLAN, and PSE. For full descriptions of the colors of the lights and their 
indications, see 

POWER—The POWER button is used to turn the power on and off. It is not 
applicable when using PoE.

48V DC—The 48V DC jack is used to connect the power adapter to the 
Cisco WAP351 if you are not using PoE. 

RESET—See 

 for information on the RESET button.