Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 릴리즈 노트
12
Release Notes
Cisco WAP121 and WAP321 Wireless Access Points, Firmware Version
1.0.0.3
1.0.0.3
April, 2012
Version 1.0.0.3
These release notes describe the open issues for the
Cisco WAP121 and WAP321 Wireless Access Points.
Cisco WAP121 and WAP321 Wireless Access Points.
Limitations
•
When working with an SSL Certificate, use only a file with a .pem extension. Others
files with extensions such as: cer, .crt, or .key will fail.
files with extensions such as: cer, .crt, or .key will fail.
•
CSCty78355. The Cisco WAP321 and WAP121 devices do not support multicast
traffic over Work Group Bridge mode. This is a design limitation of the Wireless
Ethernet in Work Group Bridge. Work Group Bridge translates and maps an IP address
to a MAC address in the WET table, which works only for Unicast IP addresses.
traffic over Work Group Bridge mode. This is a design limitation of the Wireless
Ethernet in Work Group Bridge. Work Group Bridge translates and maps an IP address
to a MAC address in the WET table, which works only for Unicast IP addresses.
Resolved Issues
This is a new release.