Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Getting Started with the Configuration

Cisco WAP131 and WAP351 Administration Guide

10

•

When using Internet Explorer 8, you can configure security settings from 
Internet Explorer. 

-

Select Tools -> Internet Options and then select the Security tab. 

-

Select Local Intranet and then select Sites. 

-

Select Advanced and then select Add. Add the intranet address of the 
WAP device (http://

<ip- address>) to the local intranet zone. The IP 

address can also be specified as the subnet IP address so that all 
addresses in the subnet are added to the local intranet zone.

•

If you have multiple IPv6 interfaces on your management station, use the 
IPv6 global address instead of the IPv6 local address to access the WAP 
device from your browser.

Follow these steps to access the configuration utility from your computer to 
configure the WAP device:

Connect the WAP device

to the same network (IP subnet) as your computer. The 

factory default IP address configuration of the WAP device is DHCP. Make sure 
that your DHCP server is running and can be reached.

Locate the IP address of the WAP device.

a. The WAP device can be accessed and managed by Cisco

network tools and 

services including the Cisco FindIT Network Discovery Utility that enables you 
to automatically discover all supported Cisco devices in the same local 
network segment as your computer. You can get a snapshot view of each 
device or launch the product 

configurationutility to view and configure the 

settings. For more information, see 

.

b. The WAP device is Bonjour-enabled and automatically broadcasts its services 

and listens for services being advertised by other Bonjour-enabled devices. If 
you have a Bonjour-enabled browser, such as Microsoft Internet Explorer with a 
Bonjour plug-in, or the Apple Mac Safari browser, you can find the WAP device 
on your local network without knowing its IP address.

You can download the complete Bonjour for Microsoft Internet Explorer browser 
from Apple’s website by visiting: 

.

c. Locate the IP address assigned by your DHCP server by accessing your router 

or DHCP server. See your DHCP server instructions for more information.