Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Changing the Default Password

Cisco WAP131 and WAP351 Administration Guide

16

For security reasons, you are required to change the administrative password 
from its default settings at your first login. If you click Cancel to bypass the wizard, 
the Change Password page appears. You can then change the default password 
for logging in. 

Password complexity is enabled by default. The minimum password complexity 
requirements are shown on the Change Password page. The new password must 
comply with the default complexity rules, or it can be disabled temporarily by 
disabling Password Complexity. See 

 for more 

information.

To change the default administrative password:

Enter the following fields to set a new password:

•

Old Password—Enter the current password (default is cisco).

•

New Password—Enter a new password.

•

Confirm Password—Enter the new password again for confirmation.

•

Password Strength Meter—Displays the strength of the new password.

•

Password Complexity—The password complexity enabled by default 
requires the password to conform to the following complexity settings:

-

Is different from the user name.

-

Is different from the current password.

-

Has a minimum length of eight characters.

-

Contains characters from at least three character classes (uppercase 
letters, lowercase letters, numbers, and special characters available on a 
standard keyboard).

Check Disable next to the Password Complexity option if you want to 

disable the password complexity rules. However, we strongly recommend keeping 
the password complexity rules enabled.

Click Save.

The Getting Started page appears. You are now ready to configure the WAP 
device.