Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Wireless Neighborhood

Cisco WAP131 and WAP351 Administration Guide

185

•

White Bar—A white bar and the number 0 indicates that a neighboring 
device that was detected by one of the cluster members cannot be 
detected by the device whose IP address is listed above that column.

•

Light Gray Bar—A light gray bar and no signal strength number indicates 
that no signal has been detected from the neighbor, but the neighbor may 
have been detected by other members of the cluster.

•

Dark Gray Bar—A dark gray bar and no signal strength number indicates 
the WAP device itself that corresponds to the IP address listed above it. A 
signal strength of zero is displayed because the device’s own signal 
strength is not measured.

To view details on a cluster member, click the IP address of a member at the top of 
the page.

The following details for the device appear below the Neighbors list: 

•

SSID—The Service Set Identifier for the neighboring access point.

•

MAC Address—The MAC address of the neighboring access point.

•

Channel—The channel on which the access point is currently broadcasting.

•

Rate—The rate in megabits per second at which the access point is 
currently transmitting. The current rate is always one of the rates shown in 
Supported Rates.

•

Signal—The strength of the radio signal detected from the access point, 
measured in decibels (dB).

•

Beacon Interval—The beacon interval used by the access point. 

•

Beacon Age—The date and time of the last beacon received from the 
access point.