Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Traffic Statistics

Cisco WAP131 and WAP351 Administration Guide

25

The Traffic Statistics page shows the real-time transmit and receive statistics for 
the Ethernet interface, the Virtual Access Points (VAPs), and all WDS interfaces. All 
transmit and receive statistics reflect the totals since the WAP device was last 
started. If you reboot the WAP device, these figures indicate the transmit and 
receive totals since the reboot.

To view traffic statistics, select Status and Statistics > Traffic Statistics.

The following information is displayed: 

•

Interface—Name of the Ethernet interface, each VAP interface, and each 
WDS interface. The name for each VAP interface is followed by its SSID in 
parentheses.

•

Total Packets—The total number of packets sent (in Transmit table) or 
received (in Received table) by the WAP device.

•

Total Bytes—The total number of bytes sent (in Transmit table) or received 
(in Received table) by the WAP device.

•

Total Dropped Packets—The total number of dropped packets sent (in 
Transmit table) or received (in Received table) by the WAP device.

•

Total Dropped Bytes—The total number of dropped bytes sent (in Transmit 
table) or received (in Received table) by the WAP device.

•

Errors—The total number of errors related to sending and receiving data on 
the WAP device.

You can click Refresh to refresh the screen and show the most current information.

The WorkGroup Bridge Transmit/Receive page shows packet and byte counts for 
traffic between stations on a WorkGroup Bridge. See 

 for more 

information on configuring WorkGroup Bridges. 

To show the WorkGroup Bridge Transmit/Receive page, select Status and 
Statistics > WorkGroup Bridge Transmit/Receive.

The Traffic Statistics table shows information for each network interface that is 
configured as a WorkGroup Bridge interface, including: