Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Email Alert Status

Cisco WAP131 and WAP351 Administration Guide

29

•

Failed Transmit Count—Number of times that an MSDU was not 
transmitted successfully due to transmit attempts exceeding either the 
short retry limit or the long retry limit.

•

FCS Error Count—Number of FCS errors detected in a received MPDU 
frame.

•

Transmit Retry Count—Number of times that an MSDU is successfully 
transmitted after one or more retries.

•

ACK Failure Count—Number of ACK frames not received when expected.

•

RTS Failure Count—Number of CTS frames not received in response to an 
RTS frame.

•

WEP Undecryptable Count—Number of frames discarded because they 
cannot be decrypted by the radio. Frames can be discarded because the 
frame was not encrypted, or it was encrypted with a privacy option not 
supported by the WAP device.

•

RTS Success Count—Number of CTS frames received in response to an 
RTS frame.

•

Multiple Retry Count—Number of times that an MSDU is successfully 
transmitted after more than one retry.

•

Frames Transmitted Count—Number of each successfully transmitted 
MSDU.

You can click Refresh to refresh the screen and show the most current information.

The Email Alert Status page shows information about the email alerts sent based 
on the SYSLOG messages generated in the WAP device. 

To view the email alert status, select Status and Statistics > Email Alert Status.

The following information is displayed: 

•

Email Alert Status—Shows if the Email Alert is enabled or disabled on the 
WAP device. The default is Disabled.

•

Number of Emails Sent—The total number of emails sent. The range is an 
unsigned integer of 32 bits. The default is 0.