Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Manage Firmware

Cisco WAP131 and WAP351 Administration Guide

50

For example, to upload the ap_upgrade.tar image located in the /share/builds/ap 
directory, enter: /share/builds/ap/ap_upgrade.tar

The firmware upgrade file supplied must be a tar file. Do not attempt to use bin 
files or files of other formats for the upgrade; these types of files do not work.

The filename cannot contain the following items: spaces, <, >, |, \, : , (, ), &, ; , #, ? , *, 
and two or more successive periods.

Enter the TFTP Server IPv4 Address and click Upgrade.

Uploading the new firmware may take several minutes. Do not refresh the page or 
navigate to another page while uploading the new firmware, or the firmware 
upload is aborted. When the process is complete the WAP device restarts and 
resumes normal operation.

To verify that the firmware upgrade completed successfully, log into the 
configuration utility, open the Upgrade Firmware page, and view the active 
firmware version.

To upgrade using HTTP/HTTPS:

Select HTTP/HTTPS as the transfer method.

If you know the name and path to the new file, enter it in the Source File Name 
field. Otherwise, click Browse and locate the firmware image file on your network.

The firmware upgrade file supplied must be a tar file. Do not attempt to use bin 
files or files of other formats for the upgrade; these types of files do not work.

Click Upgrade to apply the new firmware image.

Uploading the new firmware may take several minutes. Do not refresh the page or 
navigate to another page while uploading the new firmware, or the firmware 
upload is aborted. When the process is complete, the WAP device restarts and 
resumes normal operation.

To verify that the firmware upgrade completed successfully, log into the web-
based Configuration Utility, open the Upgrade Firmware page, and view the active 
firmware version.