Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 관리 매뉴얼

WorkGroup Bridge

Cisco WAP131 and WAP351 Administration Guide

108

-

None

-

Static WEP

-

WPA Personal

-

WPA Enterprise

•

VLAN ID—The VLAN associated with the BSS. The Infrastructure Client 
Interface will be associated with the upstream WAP device with the 
configured credentials. The WAP device may obtain its IP address from a 
DHCP server on the upstream link. Alternatively, you can assign a static IP 
address. The Connection Status field indicates whether the WAP is 
connected to the upstream WAP device. You can click Refresh at the top of 
the page to view the latest connection status.

Configure the following additional fields for the Access Point Interface:

•

Status—Check Enable for the Access Point Interface.

•

SSID—The SSID for the Access Point Interface does not need to be the 
same as the Infrastructure Client SSID. However, if attempting to support a 
roaming type of scenario, the SSID and security must be the same.

•

SSID Broadcast—Check if you want the downstream SSID to be broadcast. 
SSID Broadcast is enabled by default.

•

Security—The type of security to use for authenticating. The options are:

-

None

-

Static WEP

-

WPA Personal

•

MAC Filtering—Choose one of these options:

-

Disabled—The set of clients in the APs BSS that can access the 
upstream network is not restricted to the clients specified in a MAC 
address list.

-

Local—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a locally defined MAC 
address list.

-

RADIUS—The set of clients in the APs BSS that can access the upstream 
network is restricted to the clients specified in a MAC address list on a 
RADIUS server.