Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 관리 매뉴얼

Using the Access Point Setup Wizard

Cisco WAP131 and WAP351 Administration Guide

14

If you already have a cluster on your network, you can add this device to it by 
clicking Join an Existing Cluster, and then entering the Existing Cluster Name. 

If you do not want this device to participate in a Single Point Setup at this time, 
click Do not Enable Single Point Setup.

(Optional) You can enter the location in the AP Location field to note the physical 
location of the WAP device. 

Click Next. The Configure Device - Set System Date And Time window appears.

Choose your time zone, and then set the system time manually or set up the WAP 
device to get its time from an NTP server. For a description of these options, see 

Click Next. The Configure Device - Set Password window appears.

Enter a New Password and enter it again in the Confirm Password field. 

Uncheck Password Complexity if you want to disable the password 

security rules. However, we strongly recommend keeping the password security 
rules enabled. For more information about passwords, see 

Click Next. The Configure Radio 1 - Name Your Wireless Network window 
appears.

Enter a Network Name. This name serves as the SSID for the default wireless 
network.

Click Next. The Configure Radio 1 - Secure Your Wireless Network window 
appears.

Choose a security encryption type and enter a security key. For a description of 
these options, see 

.

Click Next. The Configure Radio 1 - Assign The VLAN ID For Your Wireless 
Network window appears.

Choose the VLAN ID for traffic received on the wireless network.

We recommend that you assign a different VLAN ID from the default (1) to the 
wireless traffic, in order to segregate it from the management traffic on VLAN 1.

Click Next. Repeat the step 9 to step 14 to configure the settings for Radio 2 
interface. 

Click Next. The Enable Captive Portal - Create Your Guest Network window 
appears.