Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch 관리 매뉴얼

Groups

Cisco WAP131 and WAP351 Administration Guide

152

Configure these parameters:

•

Group Name—Enter the name that identifies the group. The default group 
names are RO and RW. Group names can contain up to 32 alphanumeric 
characters.

•

Security Level—Sets the security level for the group, which can be one of 
these options:

-

noAuthNoPriv—No authentication and no data encryption (no security).

-

authNoPriv—Authentication, but no data encryption. With this security 
level, users send SNMP messages that use an SHA key or password for 
authentication, but not a DES key or password for encryption.

-

authPriv—Authentication and data encryption. With this security level, 
users send an SHA key or password for authentication and a DES key or 
password for encryption. For groups that require authentication, 
encryption, or both, you must define the SHA and DES keys or passwords 
on the SNMP Users page.

•

Write Views—Choose the write access to MIBs for the group, which can be 
one of these options:

-

view-all—The group can create, alter, and delete MIBs.

-

view-none—The group cannot create, alter, or delete MIBs.

•

Read Views—Choose the read access to MIBs for the group, which can be 
one of these options:

-

view-all—The group is allowed to view and read all MIBs.

-

view-none—The group cannot view or read MIBs.

Click Save. The group is added to the SNMPv3 Groups list and your changes are 
saved to the Startup Configuration.

To remove a group, check the group in the list and click Delete.