Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 릴리즈 노트
Release Notes for the Cisco WAP131 and WAP351 Wireless-N Dual Radio Access Points Firmware Version 1.0.2.2
1
Release Notes
Release Notes for the Cisco WAP131 and
WAP351 Wireless-N Dual Radio Access Points
Firmware Version 1.0.2.2
WAP351 Wireless-N Dual Radio Access Points
Firmware Version 1.0.2.2
June 2016
These release notes describe the known issues in the Cisco WAP131 and
WAP351 Wireless-N Dual Radio Access Points firmware version 1.0.2.2.
WAP351 Wireless-N Dual Radio Access Points firmware version 1.0.2.2.
New Features
•
Added Japanese support and localized GUI
•
Upgraded OpenSSL to 1.0.2d and added TLSv1.2 support
Issues Resolved in 1.0.1.4 Release
•
Some characters of the cluster location are dropped when you set the
Cluster Location settings through the Setup Wizard. (CSCur36577)
Cluster Location settings through the Setup Wizard. (CSCur36577)
•
The WDS bridge is established between two units in different channels.
(CSCuq49207)
(CSCuq49207)
•
The port status of the VLAN cannot return to its default status after the
VLAN ID (except VLAN 1) is deleted. (CSCur51986)
VLAN ID (except VLAN 1) is deleted. (CSCur51986)
•
Away Timeout GUI issue. (CSCuu69519)