Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 데이터 시트
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 9
Specifications
Description
Minimum Requirements
● Switch or router with PoE support, PoE injector, or AC power adapter
● Web-based configuration: Java-enabled web browser
● Web-based configuration: Java-enabled web browser
Warranty
Access point
Limited lifetime
Table 2.
Cisco WAP150 Wireless-AC/N Access Point RF Performance Table
Maximum Transmit Power (dBm)
Per Chain
Receiver Sensitivity (dBm)
Per Chain
2.4GHz
– 802.11b
1 Mbps
16.0 +/- 1.5
-98.0
11 Mbps
16.0 +/- 1.5
-90.0
2.4GHz
– 802.11g
6 Mbps
14.0 +/- 1.5
-90.0
54 Mbps
14.0 +/- 1.5
-75.0
2.4GHz
– 802.11n HT20
MCS0/8
14.0 +/- 1.5
-90.0
MCS7/15
14.0 +/- 1.5
-74.0
2.4GHz
– 802.11n HT40
MCS0/8
13.0 +/- 1.5
-88.0
MCS7/15
13.0 +/- 1.5
-71.0
5GHz
– 802.11a
6 Mbps
16.0 +/- 1.5
-91.0
54 Mbps
16.0 +/- 1.5
-77.0
5GHz
– 802.11n HT20
MCS0/8
15.0 +/- 1.5
-91.0
MCS7/15
15.0 +/- 1.5
-74.0
5GHz
– 802.11n HT40
MCS0/8
15.0 +/- 1.5
-87.0
MCS7/15
15.0 +/- 1.5
-71.0
5GHz
– 802.11ac HT20
MCS0
14.0 +/- 1.5
-91.0
MCS8
14.0 +/- 1.5
-69.0
5GHz
– 802.11ac HT40
MCS0
14.0 +/- 1.5
-87.0
MCS9
14.0 +/- 1.5
-64.0
5GHz
– 802.11ac HT80
MCS0
14.0 +/- 1.5
-88.0
MCS9
14.0 +/- 1.5
-61.0
Note: This table shows the maximum capability of the hardware. The transmit power may be reduced to comply
with local regulatory requirements.
with local regulatory requirements.