Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

The Cisco IOS Conversion Upgrade Image for Cisco Aironet 350 and 1200 Series Access Points converts 
an access point system from VxWorks to Cisco IOS Release 12.2(13)JA2. For more information on 
features and caveats in this release, click this link to browse to the release notes for Cisco IOS Release 
12.2(13)JA2:

When you use the upgrade image with the Cisco Aironet Conversion Tool for Cisco IOS Software, the 
upgrade image and the conversion tool maintain the access point configuration while converting the 
access point system to Cisco IOS software. When you load the upgrade image onto an access point 
without using the conversion tool, the upgrade image converts the access point system to Cisco IOS 
software with all settings at factory defaults.

To successfully complete the upgrade process, your access point must meet these requirements:

Your access point must be running VxWorks version 12.03T, 12.02T1, 12.01T1, 12.00T, 11.23T, or 
11.21

The upgrade image and the conversion tool do not support VxWorks version 12.04. Access 
points running operating system version 12.04 must be downgraded to a supported operating 
system version before using the upgrade image or the conversion tool.

Your access point must have at least 4 MB of free memory. To ensure that the access point has 
enough free memory, set the Maximum memory reserved for Detailed Event Trace Buffer 
(bytes) setting on the Event Handling Setup page to 0.

Cisco Aironet 340 Series Access Points do not support Cisco IOS software. Do not attempt to load the 
upgrade image on 340 series access points.

On access points that do not run Cisco IOS software, the software version appears in red at the top left 
of most pages in the web-browser interface. The home page on access points not running Cisco IOS 
software looks like the page in 

.