Cisco Cisco Aironet 1600i Access Point

This guide is for the networking professional who installs and manages Cisco Aironet Access Points in 
Autonomous mode. To use this guide, you should have experience working with the Cisco IOS software 
and be familiar with the concepts and terminology of wireless local area networks.

The guide covers Cisco IOS Releases 15.2(4)JB3a. The following access point platforms are supported:

AP 702

AP 802

AP 1040

AP 1140

AP 1260

AP 1530

AP 1550

AP 1600

AP 2600

AP 3500

AP 3600

AP 3700 (Site survey only)

For Cisco Aironet 1530 Series access points alone, you are required to load the Cisco IOS version 
15.2(4)JB3b. This IOS version applies only to Cisco Aironet 1530 Series access points.

This guide does not cover lightweight access points. Configuration for these devices can be found in the 
appropriate installation and configuration guides on Cisco.com.

You can install Cisco IOS Release 15.2(4)JB3a on Cisco Aironet 3700 Series access points to perform 
site surveys. The AP3700 series access points are supported only in site survey mode. This release runs 
on these access points with limited functionality. You can manually adjust the following settings on such 
site-survey access points:



– Channels on each radio



– Transmission power on each radio

