Cisco Cisco Aironet 3700e Access Point

 describes how to perform one-time operations to 

administer your access point, such as preventing unauthorized access to the access point, setting the 
system date and time, and setting the system name and prompt.

 describes how to configure settings for the access point radio 

such as the role in the radio network, transmit power, channel settings, and others.

 describes how to configure and manage multiple Service Set 

Identifiers (SSIDs) and multiple basic SSIDs (BSSIDs) on your access point. You can configure up to 
16 SSIDs and up to eight BSSIDs on your access point.

describes how to configure Spanning Tree Protocol 

(STP) on your access point, bridge, or access point operating in a bridge mode. STP prevents bridge 
loops from occurring in your network.

 describes how to configure the 

access point to act as a local RADIUS server for your wireless LAN. If the WAN connection to your 
main RADIUS server fails, the access point acts as a backup server to authenticate wireless devices.

 describes how to configure the cipher suites required 

to use authenticated key management, Wired Equivalent Privacy (WEP), and WEP features including 
MIC, CMIC, TKIP, CKIP, and broadcast key rotation.

 describes how to configure authentication types on the 

access point. Client devices use these authentication methods to join your network.

 describes how to configure the access point to participate in WDS, to allow fast 

reassociation of roaming client services, and to participate in radio management.

 describes how to enable and configure the 

RADIUS and Terminal Access Controller Access Control System Plus (TACACS+), which provide 
detailed accounting information and flexible administrative control over authentication and 
authorization processes. 

 describes how to configure your access point to interoperate with 

the VLANs set up on your wired LAN. 

 describes how to configure and manage MAC address, IP, and 

EtherType filters on the access point using the web-browser interface.

 describes how to configure and manage MAC address, IP, and 

EtherType filters on the access point using the web-browser interface.

 describes how to configure Cisco Discovery Protocol (CDP) on your 

access point. CDP is a device-discovery protocol that runs on all Cisco network equipment.

 describes how to configure the Simple Network Management 

Protocol (SNMP) on your access point. 

 describes 

how to configure your access point as a hot standby unit or as a repeater unit. 

 describes how to manipulate the Flash file 

system, how to copy configuration files, and how to archive (upload and download) software images.

 describes how to configure system message 

logging on your access point.

provides troubleshooting procedures for basic problems with the access 

point.

 lists some of the protocols that you can filter on the access point.