Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE 관리 매뉴얼

Wireless

Networks

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

551/561

Configuring VAPs

To configure VAPs:

STEP 1

Select Wireless > Networks in the navigation pane.

STEP 2

Select the Enabled check box for the VAP you want to configure.

—Or—

If VAP0 is the only VAP configured on the system, and you want to add a VAP, click Add.
Then, select the VAP and click Edit.

STEP 3

Configure the parameters:

•

VLAN ID—The VID of the VLAN to associate with the VAP.

CAUTION

Be sure to enter a VLAN ID that is properly configured on the network. Network problems can
result if the VAP associates wireless clients with an improperly configured VLAN.
When a wireless client connects to the WAP device by using this VAP, the WAP device tags all
traffic from the wireless client with the VLAN ID you enter in this field, unless you enter the
port VLAN ID or use a RADIUS server to assign a wireless client to a VLAN. The range for
the VLAN ID is from 1 to 4094.

NOTE

If you change the VLAN ID to a different ID than the current management

VLAN ID, WLAN clients associated with this specific VAP cannot administer the
device. Verify the configuration of the untagged and management VLAN IDs on the
LAN page. For more information, see

VLAN and IPv4 Address Settings

•

SSID Name—A name for the wireless network. The SSID is an alphanumeric string of
up to 32 characters. Choose a unique SSID for each VAP.